WBP-OA31D-1 Outdoor Wired Guide Screen Drive Unit Bracket And Other Parts IP65
Parameter
| Model: | (single-layer) |
| Box Size: | 690 * 210 * 65mm (single layer) |
| 690 * 370 * 65mm (double-layer) |
| 690 * 530 * 65mm (three layers) |
| Vertical pole size: | 1 2 00mm |
| Appearance material: | Aluminum alloy outer frame |
| illuminant: | red green |
| Levels of Protection: | IP65 |
| Working Temperature: | - 40℃ ~ +85℃ |
| Working Voltage: | AC 110～240V |
| Power Dissipation: | 15 W (one-way) |
| Ambient Humidity | 90% RH (no condensation) |
| Communication Mode: | RS485 |
| Communication Distance: | ≤300m |
| Individual Digital Display Dimensions | 160*160 mm |
| P10 Module Size | 160*320mm |
Table 3.1 Technical Parameters Table of outdoor wired guide screen
Product Description
The outdoor guide screen, an essential facility in parking lots, is installed at vital fork roads inside. It is composed of a high
brightness P10 module, a drive unit, a bracket, and other components. This screen is designed to connect with the outdoor
centralized controller, receiving its output information. Then, it presents the quantity of empty parking spaces in the area using
numbers and arrows, enabling vehicle owners to promptly find available spots. By doing so, it guarantees the orderly
operation of the parking lot and makes full use of the parking spaces. Additionally, one-way, two-way, or three-way outdoor
guide screens can be customized as per specific demands to better serve various parking scenarios. 
Product features:
1) The guide screen adopts tempered glass panel + cold steel baking paint shell, the appearance of simple atmosphere;
2) The shell adopts waterproof and dustproof design, and the use of ultraviolet resistant paint, not easy to change color;
3) The guide screen has short circuit, overvoltage, overcurrent, overload protection;
4) Red and green two color instructions can be clearly recognizable, high luminous intensity, visible distance, can be wide perspective.
Product installation
The outdoor wired guide screen is installed in the column mode, and the power cord is connected nearby and introduced into the guide screen box. The installation diagram is shown in Figure 4.1:
Figure 4.1 Installation diagram of outdoor wired guide screen
